Hurricane Shutter
Pricing
September 2007
Prices subject to change without notice
| Miami-Dade County Approved |
 |
Miami-Dade County Approved |
| Hurricane Bahama Shutter System |
Hurricane Colonial Shutter System |
| Mill Finish (unpainted) $38
/ sq ft |
Mill Finished (unpainted) $45
/ sq ft |
| Painted (powder coated) $49.50
/ sq ft |
Painted (powder coated) $56.50
/ sq ft |
| Minimum shutter price under 8 sq ft $396 |
Minimum shutter price under 8 sq ft $452 |
Round Top Shutters available add $275 / shutter leaf
Miami-Dade County Approved Bahama over Colonial Hurricane Shutter System
(call for pricing)
Shipping, Handling & Sales Tax (Florida residences only) are NOT
included in the above prices
All Shutter Systems include the following:
Complete factory assembled shutter system
Fasteners: Build Out Fame to building with/
plastic plugs to cover the screw holes
Shutter
to Build Out Frame
Hold Open
Close Thumb Screws
Hold Open
Rods
Rubber Bumpers
Installation
Guide
The following items required for an exact price quote:
Size of exterior opening
Width & height of
masonry opening
or
Width & height of
the window frame when if protrudes past the building
Type of structure (block, wood or steel)
Trim & sill information
Location of glass in relationship with the exterior
finish surface
Wind velocity (MPH)
Exposure category
Building width & length
Mean roof height
Roof slope
Shutter style for each opening (Bahama, Colonial, or Bahama
over Colonial)
City, State & Zip Code required for shipping quote
Please Email or Fax the above information for an exact quote
Pricing subject to change without notice
| Measuring & Pricing |
| |
|
| Hurricane Bahama, Colonial, & Bahama over Colonial
Shutter Systems: |
 |
Our hurricane shutter systems have a build out frame that bolts
to the building around your window opening, then the shutter attaches
to the build out frame. This frame is 1” x 4” x 1/8”
aluminum, we pre drill holes for fasteners, ¼” inside
hole & ¾” outside hole to accept a plastic plug
to cover the hole. |
| |
| Measuring & Calculations for Pricing: |
| |
1 Measure the width & height of the outside
opening or the outside of the window. Do not include any trim or
stucco bands. |
| |
2 Measure the glass in relationship
to the wall
Place a straight edge across the window
corner, measure the clearance from the glass to the straight
edge and the clearance from the wall to the straight edge.
This will determine the thickness of the build out frame.
Our shutter system requires 3" of separation between
the back of the shutter slats to the glass to meet Miami Dade requirements.
1 x 4 frame is included in the base price
/ square feet |
|
| |
3 Add 8” to the width and height |
| Example: 36” (Width) x 48” (Height) = 44”
x 56” = 2,464 square inches (divided by 144 to get
square feet) / 144 = 17.11 square feet (.01 to .49 round
up to .5 and .51 to .99 round up to 1) 17.5 square feet
x price / square feet = $ / shutter (see minimum shutter
sq. ft. price) |
|
| |
4 The hurricane shutters weigh 6 pounds / square
foot. |
| |
|
| Please call if you have problems or Questions. |
| |
Office 239-774-2025 |
| FAX 239-774-9483 |
|
|
Pricing subject to change without notice
